Will I have an issue if the cable length from the LCD to the Rambo is about 700mm long?
Thanks
Tony
LCD Cable length
LCD Cable length
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;
Re: LCD Cable length
You'll have problems if they're any longer than the stock LCD cables. Any longer and you'll need to shield them and/or wrap them through a ferrite core.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Re: LCD Cable length
Ok, thanks
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;
Re: LCD Cable length
I tried 800mm (because i was curious) and just finished a 3 hr print and all went good using an sd card too. Go figure.
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;