V2 in Minnesota - plenty of questions.

JFettig · Post by **JFettig** » Thu Dec 11, 2014 3:31 pm

I will have to post it up when I get home

JFettig · Post by **JFettig** » Thu Dec 11, 2014 5:16 pm

Here are the files
http://repables.com/r/436

BenTheRighteous · Post by **BenTheRighteous** » Thu Dec 11, 2014 5:44 pm

Thanks! How do you attach that 3rd screw? Do you just thread it into the print itself or do you manage to get a nut in there somehow?

JFettig · Post by **JFettig** » Thu Dec 11, 2014 5:53 pm

I threaded them all into the print using sheet metal screws

RegB · Post by **RegB** » Thu Dec 11, 2014 6:23 pm

Koooo_wel, THANKS !!!
Gotta print me one (or several) o' them (-:

Post by **Eaglezsoar** » Fri Dec 12, 2014 6:15 am

Thank you for posting the files, this look like a good fan mount!

JFettig · Post by **JFettig** » Sun Dec 14, 2014 11:48 pm

Had some corners lift on kapton so I added abs juice... Wow that made it impossible to get the parts off. Mix juice thinner or skip kapton?

jdurand · Post by **jdurand** » Sun Dec 14, 2014 11:51 pm

Windex (tm)

JFettig · Post by **JFettig** » Mon Dec 15, 2014 12:05 am

Tried, didn't help with removal of the parts

jram · Post by **jram** » Tue Dec 16, 2014 9:15 pm

I third that! I like that design, my shroud now only seems to cool 1/2 of the material.

lightninjay · Post by **lightninjay** » Fri Dec 19, 2014 12:47 am

Hey JFettig! I just wanted to say thanks for the files! Your mount works great

It's helping me print my cousin a Tardis at the moment!

JFettig · Post by **JFettig** » Fri Dec 19, 2014 9:25 am

lightninjay wrote:Hey JFettig! I just wanted to say thanks for the files! Your mount works great

It's helping me print my cousin a Tardis at the moment!

Awesome! glad they're getting put to use!

I'm building an enclosure for my printer, just 3 more prints for the top brackets then need to print up 3 or 4 parts for the latch setup. I'm running out of white ABS so the rest of the parts might have to be black.

[img]http://i.imgur.com/49ADE0K.jpg[/img]

JFettig · Post by **JFettig** » Fri Dec 19, 2014 8:24 pm

Just printed the last one of the enclosure brackets, I had about a foot of white filament left at the end of that! Then I noticed that my PEEK fan wasn't running, somehow it jammed up or something, the fan shroud is completely melted but the hot end seems fine surprisingly!

Mac The Knife · Post by **Mac The Knife** » Fri Dec 19, 2014 9:32 pm

It seems that bushed fans don't last long in these printers. Both my Rambo and Peek fan have been replaced with ball bearinged versions.

nitewatchman · Post by **nitewatchman** » Fri Dec 19, 2014 10:10 pm

Mine also, Peek Fan about a week - Rambo Fan about a month.

bot · Post by **bot** » Fri Dec 19, 2014 10:32 pm

I never even installed my rambo fan, and my first peek fan was DOA (essentially) and my second one seems to be slowly dying, but I've got an e3d on the way and a ball bearing 25mm backup for the seemecnc hot end which will be a backup to the e3d.

jram · Post by **jram** » Mon Dec 22, 2014 2:04 pm

Hi JFettig. Just wanted to say thanks for making this stl available. Printed one out this morning and the fit is superb, seems to be cooling much better than my my original configuration.

Welcome to the SeeMeCNC Community

V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.

Re: V2 in Minnesota - plenty of questions.