Hi all !
New on this forum, i want to introduce myself here before posting anithink else !
I m working on a 3D printing service factory where we get ten printers ( 3x 3NTR A2, 2x 3NTR A4, 1x Mojo, 1x Fortus 250, 1x Markone, 1x 3D Up+) and using a lot Kisslicer. Unfortunaly, the Kisslicertalk forum died slowly, so I want to found an other community to share some tips and push the technology limits more and more !
And that's the way I come here !
Sorry for my bad english ( I ll work it, I promise ! ) and have a nice day all !
Morgan.
Hi from France !
-
Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2608
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: Hi from France !
Hi Morgan, welcome to the forum!
I think you'll be pleased with the general level of knowledge that the members of this forum have. Since the Rostock is a kit printer, it attracts people that are more technically inclined, and you'll find a lot of people here who are doing some really groundbreaking things!
Looking forward to learning more about your shop and some of the projects that you're working on.
I think you'll be pleased with the general level of knowledge that the members of this forum have. Since the Rostock is a kit printer, it attracts people that are more technically inclined, and you'll find a lot of people here who are doing some really groundbreaking things!
Looking forward to learning more about your shop and some of the projects that you're working on.
-
MorganTH
- Plasticator
- Posts: 17
- Joined: Wed Nov 04, 2015 6:28 am
- Location: Angers ( France )
- Contact:
Re: Hi from France !
Thanks for your answer !
You re right, there is a few topics that i looked which was really good ( I think in particulary of the mhackney's one ) and i think this is the place where I can exchange on more complex problems.
Unfortunaly as we work for industrials clients, we are not allowed to show a lot of things. What we want to do in our shop is to use a lot of technical materials ( Abs 80% of the time, PETG, Kevlar, Carbon filament and soon PEEK and PC ) and to transform the printing as final product, not just as prototype.
But I promise you, i ll try to share some printing soon !
You re right, there is a few topics that i looked which was really good ( I think in particulary of the mhackney's one ) and i think this is the place where I can exchange on more complex problems.
Unfortunaly as we work for industrials clients, we are not allowed to show a lot of things. What we want to do in our shop is to use a lot of technical materials ( Abs 80% of the time, PETG, Kevlar, Carbon filament and soon PEEK and PC ) and to transform the printing as final product, not just as prototype.
But I promise you, i ll try to share some printing soon !
-
Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7159
- Joined: Sun Apr 01, 2012 5:26 pm
Re: Hi from France !
Welcome to the forum Morganth.
Thanks for mentioning that you read and learned something from Mhackney's post. He is one of our very frequent posters and shares his huge store of knowledge
with everyone. You can search and find more of his posts.
Perhaps you can answer some of the questions we get on the forum and we can help you out if you have any questions or other needs.
Happy Printing!
Thanks for mentioning that you read and learned something from Mhackney's post. He is one of our very frequent posters and shares his huge store of knowledge
with everyone. You can search and find more of his posts.
Perhaps you can answer some of the questions we get on the forum and we can help you out if you have any questions or other needs.
Happy Printing!