Page 1 of 1
Hi from the Netherlands
Posted: Wed Apr 29, 2015 10:37 am
by bhulshof
Hi i'm bernard
Just received and built my rostock max v2
Still tweaking the printer a bit but getting there
thanks for letting me on the forum and hope to learn/contribute to it a lot
thx!
Re: Hi from the Netherlands
Posted: Wed Apr 29, 2015 1:20 pm
by bvandiepenbos
Welcome to the Forum
Re: Hi from the Netherlands
Posted: Wed Apr 29, 2015 4:36 pm
by Eaglezsoar
Welcome to the Forum!
If you get a chance it would be great to see some pictures of your printer.
If you have a problem or a question just let us know and someone on the forum
will help you out. Thanks for buying a Rostock Max V2!
Re: Hi from the Netherlands
Posted: Wed Apr 29, 2015 9:58 pm
by mvansomeren
Welcome from a transplanted Nederlander.
Re: Hi from the Netherlands
Posted: Sun May 10, 2015 7:16 am
by bhulshof
Thx for the warm welcome!
Will post some pics later.
I'm currently considering changing the hotend to one that can handle higher themps and has less problems with XT from colorfabb.
Can anyone recommend a good hotend?
Thx!
Re: Hi from the Netherlands
Posted: Sun May 10, 2015 6:22 pm
by bot
What problems did you have with XT? I recently printed some Carbon Fiber XT (CF-20) with a stock seeme hotend without problems.
Re: Hi from the Netherlands
Posted: Mon May 18, 2015 7:20 am
by bhulshof
Sorry for the late reply,
The hot end doesnt seem to keep to 245 deg, which was the value i set for the temp
Colorfabb suggest to use temps between 240 and 260 deg. and when printing at app. 50 mm/s the extruder clicks suggensting that it cannor extrude fast enough.
So i figured that a diffenrent hot end might have lower push resistance
thx!
Re: Hi from the Netherlands
Posted: Mon May 18, 2015 7:04 pm
by bubbasnow