Page 1 of 1
Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 1:27 am
by DerStig
I saw a enclosure for the 7" screen that fit in the Rostock Max V2 original LCD bay. It was also tilted. Anyone remember that one? I'm looking to print it.
Thanks
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 1:30 am
by Jimustanguitar
DC42 has one. He is the Duet and Due guy, after all.
http://www.thingiverse.com/thing:656884
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 2:19 am
by DerStig
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 4:32 pm
by crocky
It suits what I have in mind as well...
Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 6:21 pm
by DerStig
crocky wrote:It suits what I have in mind as well...
Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
The mounts for the PanelDue driver and the Duet are in the "snorkel" plus there is a cover, I forgot to link it
http://forum.seemecnc.com/download/file.php?id=11747
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 8:29 pm
by Outsider
you have version 2.4
here is a copy of version 2.6
your faceplate is version 1.5
here is version 1.8
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 10:20 pm
by CRPerryJr
Re: Enclosure for 7" Panel Due
Posted: Tue Jan 03, 2017 11:29 pm
by 3D-Print
Here is how I attached the Due and Duet using the mount.
http://forum.seemecnc.com/viewtopic.php ... 100#p85491
Re: Enclosure for 7" Panel Due
Posted: Wed Jan 04, 2017 12:33 am
by crocky
Outsider wrote:you have version 2.4
here is a copy of version 2.6
PanelDue and Duet Base for ROSTOCK Max V2 - Version 2.6.stl
your faceplate is version 1.5
here is version 1.8
PanelDue and Duet Faceplate V2 Version 1.8.stl
Thank you.....
and 3D Print?