machining molds

Post by **PartDaddy** » Wed Nov 25, 2015 10:54 am

Streaming live at one of our four CNC VMC's, cutting final injection molds for Eris.

https://video.nest.com/live/partdaddy

> CNC = computer numerical control
> VMC = vertical machining center

JFettig · Post by **JFettig** » Wed Nov 25, 2015 12:41 pm

Very cool! What camera are you using and how are you protecting it? I've been wanting to do that with my VMC.

stonewater · Post by **stonewater** » Wed Nov 25, 2015 12:51 pm

looks like a nest camera.
Tom C

Post by **PartDaddy** » Wed Nov 25, 2015 2:15 pm

Yes, a nest camera. I just set it on top of the machine & plugged it in. They really easy to get up and running.

Post by **PartDaddy** » Sun Dec 06, 2015 7:08 pm

Streaming live at one of our four CNC VMC's, cutting final injection molds for Eris.

https://video.nest.com/live/partdaddy

Post by **PartDaddy** » Sat Dec 12, 2015 12:12 pm

Starting one of our mills in a little while. Turn down your volume, I'll have sound on so I can hear the machine running.

https://video.nest.com/live/partdaddy

626Pilot · Post by **626Pilot** » Sat Dec 12, 2015 7:02 pm

What kind of mill is that?

Post by **geneb** » Sat Dec 12, 2015 8:38 pm

It's probably one of the FADAL machining centers they've got. Drool worthy hardware for sure!

g.

Post by **PartDaddy** » Mon Dec 14, 2015 8:44 am

A FADAL. They're easy to work on and relatively inexpensive to maintain.

Post by **Eaglezsoar** » Mon Dec 14, 2015 3:08 pm

PartDaddy wrote:A FADAL. They're easy to work on and relatively inexpensive to maintain.

Too bad they are not inexpensive to buy!

Welcome to the SeeMeCNC Community

machining molds

machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds

Re: machining molds