Slicer profiles
Slicer profiles
Just took delivery of a new BOSSdelta 500. Awesome machine! Just wondering if there were any slicer profiles for it other than the default one in the quickstart guide (PLA .7 nozzle, .2 layer) Thanks.
Re: Slicer profiles
Hi,
In STEP TWO of our guide here
https://seemecnc.dozuki.com/Guide/Clean ... 41?lang=en
the last link in step two will download all of our factory posted slicing profiles.
In Cura, projects files end with 3MF. And slicing profiles only end with .curaprofile both which can be imported into Cura 4.6.2, and any of the .curaproject slicing profiles will be a very good starting point for the BOSSdelta 500.
Here's the link to SeeMeCNC GitHub shared slicing profiles
https://github.com/seemecnc/slicing-pro ... Cura%204-6
And the link to just immediately download all slicing information
https://github.com/seemecnc/slicing-pro ... master.zip
In STEP TWO of our guide here
https://seemecnc.dozuki.com/Guide/Clean ... 41?lang=en
the last link in step two will download all of our factory posted slicing profiles.
In Cura, projects files end with 3MF. And slicing profiles only end with .curaprofile both which can be imported into Cura 4.6.2, and any of the .curaproject slicing profiles will be a very good starting point for the BOSSdelta 500.
Here's the link to SeeMeCNC GitHub shared slicing profiles
https://github.com/seemecnc/slicing-pro ... Cura%204-6
And the link to just immediately download all slicing information
https://github.com/seemecnc/slicing-pro ... master.zip
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996