Welcome to the SeeMeCNC Community

Good Afternoon, I'll definitely try that next, I would also like to give you guys a update as to what's been happening since then. After being able to get the head to heat up to somewhat the desired temperatures. I found out that when I told it to print anything it was still doing the same thing. It ...

OK so here's my update to the situation: After trying many things and changing the firmware around without any real success I finally got it to heat up to the correct temperature. The only issue that I've found so far is that it won't go past 267.8c Why it worked is still beyond me but this is what ...

I ended up getting a 25w heater(blue leads), how would you go about doing dead-time heating?

OK so I went ahead and used my laptop and installed the arduino program and started from scratch. I cleared the eeprom. Got the Repetier firmware changed all the things that have been listed on here. examples of what was changed Line 187: #define EXT0_TEMPSENSOR_TYPE 8 Line 571: #define MAXTEMP 300 ...

Good Morning,

My (EXT0_PID_MAX) is set to 300 after this morning. It was 255 after I changed it I tried to get the hot end to heat to 250 and I still it only got to 244.4c.

Tried those settings as well, still maxes out at 242c. Maybe it's the arduino upload not uploading correctly? I'll try a different pc tomorrow just to be sure. If anybody else has any ideas please let me know.

So after rebooting everything ( pc, Printer) It now goes up to 240.0 and fluctuates from that to 240.4 and back. Not to sure what's up with that but I'll keep trying. Also while re-uploading the repetier file to the printer I did just get a message (Low memory available, stability problems may occur ...

Ok, so I've just built my rostock max v2 and upgraded the hot end to a all metal head (e3d v6). I changed the repetier settings using this from the assembly page. Repetier Use thermistor definition number 8: #define EXT0_TEMPSENSOR_TYPE 8 Or select "ATC Semitec 104-GT2" if using the Online ...

No unfortunately I'm completely new to 3d printing. I did study computer animation at Full Sail and worked on creating models. I'm hoping that I can use some of the knowledge from that towards creating some interesting prints. Aside from that I'm working to help Travelphotog with any of his ...

Good morning good people! So I just finished building and finished doing the paper calibration on my Rostock Max V2 last night. I'm going to try and do the dial indicator calibration once I get all the parts needed to mount it. I just wanted to introduced myself to the forum. This has been a ...