Welcome to the SeeMeCNC Community

Hi Guys, Unfortunetley i have to put the printer up for sale. Other priorities need to come first at the moment and i really have not had the time to print as much as i would like. Location - Bexley North in Sydney Price - 1400 AUD Extras - E3D V6 Hotend ( Already Installed on the printer) Spare ...

Yeah I'm glad I'm around, took me a day or so to fully realise that I actually was still alive. Sounds odd, but getting out alive felt so surreal that I wasn't sure I actually had. I even went to the beach and caught some waves with only slight nervousness. All is good, life is good. Wow what a ...

Hi All,

I really want a holder i can screw into the wall or my desk.

Has anyone by any chance designed one?

Paul.

Awesome!!! cant wait to try this

Would you be able to provide the .stl for that by any chance?

I just received one of these fans today. I noticed it has a 3 to 2 pin adapter in there with the normal red and black cables. Did you guys connect the adapter, cut the connector and then solder it onto the rambo?

Wow looks really good!!

i live the direction you're heading with your business. Always out to help others.

Good work

Paul

yes you would, Mcslappy here on the forums have designed one which works just great and prints very smoothly http://repables.com/r/296/ heathenx also has a version. I am using the fan shroud from this version to work with Mcslappys original "longer" version of the mount http://repables.com/r/338/

Congrats!! Awesome feeling ay. the suspense is agonising.

I like your the LED lamp you're using. Do u mind letting us know where you got that from?

Paul

Very, Very nice prints! Thanks for the great pictures! What slicer do you use the most? Thanks Eagle I find myself using cura the most at the moment, but i do switch between kiss and cura depending on filament type and what im printing. Took a while to get the hang of how one slicer prints but now ...

Here are some prints over the past few months This ones fresh off the printer - one of my favorites so far - The antlers were a challenge [img]http://i1110.photobucket.com/albums/h451/apostoly1/Mobile%20Uploads/IMG_20140713_195454.jpg[/img] [img]http://i1110.photobucket.com/albums/h451/apostoly1 ...

GeckoTek Update #4 1 comment Like 2 likes Hi Everyone! We have just 9 Days to go. This has been an incredible experience for all of us. Again I can't express how much we appreciate all of your support. There is some important information below. Please read everything. In order to help us finish ...

Guanu, i was never aware of step 15 - (After you have adjusted the screws, You have changed the Z height, so you want to go back and re-set the Z height the way you did earlier in this guide.) Going off previous methods documented on here, i never had to recalibrated the Z after the initial Z Height ...

If anyone is re applying the PEI, maybe a video demonstration would be helpful for anyone thinking of doing this in the future

I calibrated my bed last weekend after taking the hot end off and mucking around with the printer. Now today (after printing successfully just last night) i am getting horrible prints, so i decided the check the level of all the towers and it seems like each are off with only one where its supposed ...

enggmaug wrote:Guys, I really learn a lot, reading your comments, and searchnig the terms you refer to that I don't know about...

Just wanna thank you for that...

Its a wealth full of knowledge on here. If it wasn't for this forum i probably wouldn't have been this into 3d printing.

mhackney wrote:How about powder coating? It is really easy to do and doesn't require a lot of equipment to do a basic job.

i could powder coat it, but i really just want it too cost as minimal as possible or else i would have just ordered the black and waited a little longer for it.

Thanks for that in detail response

I have already ordered the normal anodized aluminium. I might just leave it the way it is. I really dont mind the look anyway

Thanks

Hi all, I am building a racing rig and using Aluminium profile as the base for the seat. The black anodized stuff is just always out of stock and little bit more expensive so i just went with the normal anodized grey color. I'm thinking of painting it a matt black myself, but from what i have ...

Hi all, I am building a racing rig and using Aluminium profile as the base for the seat. The black anodized stuff is just always out of stock and little bit more expensive so i just went with the normal anodized grey color. I'm thinking of painting it a matt black myself, but from what i have ...

i have been waiting for over a month and they have not shipped them yet (24th of May) I have purchased http://www.amazon.com/gp/product/B0013HKZTA/ref=oh_details_o00_s01_i00?ie=UTF8&psc=1 on May 26, month and 1 day ago. Now i have trying glue stick, insulation tape, - not able to print https://www ...

Renha wrote:how fast did you get PEI sheet from Amazon? I am waiting a lot of time, and it isn't even shipped

i have been waiting for over a month and they have not shipped them yet (24th of May)

Cant wait to test this out tonight!!

Thanks for the info guys!!

If what you are asking is "can I use Cura to slice my STLs to create gcode and then use Repetier Host to print them" then the answer is yes. Simply save the gcode to a file in Cura and then load into RH to print. Very similar to the way you would use KISS. ah ye i guess i could do that, that makes ...

Hi all I tend to shift between Cura and kisslicer at the moment purely because Kiss doesn't have a brim option....yet I actually prefer Kiss's quality but I like the ease of use in Cura. With Cura I don't like that you cant control the printer through the PC and only via the LCD on the printer ...