Welcome to the SeeMeCNC Community

Baud rates match. I even tried changing both to 256000, still no luck.

I am from Kalamazoo Michigan. So am I (well close, I live in Portage). Have you checked the Kalamazoo Makers Guild (http://www.meetup.com/kalamazoo-makers-guild/)? We have a meeting tomorrow and several of us have Rostock Maxes. Haha, I am from Portage, and am actually living in Portage right now ...

The fact that it says that on Repetier Host shows that it is communicating with the Repetier firmware. When you first turn on the printer and computer and go into Repetier Host and push connect you should see on the Repetier host screen the communication between Repetier Host and the firmware on ...

All the pins are soldered and none of them are bridged together. Without the adapter attached to the Rambo the problem still exists. After checking the adapter and plugging in the LCD again, the problem still persists. Now I guess I didn't think of this until you mentioned to look at the adapter ...

I didn't phrase that right. The problem started shortly after I soldered the small LCD to Rambo adapter board. (the LCD is plugged into the adapter which is plugged into the Rambo board, as shown in the manual.) I could control the machine from my computer once I had the LCD hooked up and working. I ...

Hello everyone, my name is Austin. I am from Kalamazoo Michigan. I just recently graduated with an engineering degree and I just finished building my Rostock MAX (a little graduation gift to myself :) ) I am new to delta printers, but I have used my universities Cupcake CNC, and Replicator 2x from ...

I tried searching but didn't quite get my specific problem. I first got my Rostock MAX up and running on Monday, and I could print from my computer just fine. Tuesday night I finished soldering the LCD to RAMBO board (I somehow missed that step right up until the guide said to plug the LCD in, and I ...