Has anyone created a config file for using Repetier's firmware builder on the website? I'd love to play around with V.092 and keep up with the more current revisions.
http://www.repetier.com/firmware/v092/index.html" onclick="window.open(this.href);return false;
I'm currently running "stock" Rambo electronics, and would love to have a starting point to jump off of.
Config file for Repetier firmware builder
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
- briankb
- Printmaster!
- Posts: 106
- Joined: Thu Jun 13, 2013 11:50 am
- Location: North Florida - USA
- Contact:
Re: Config file for Repetier firmware builder
I second this request.
- CNC's: Rostock Max upgraded to v3.2, Prusa i3 MK3 MMU, Formlabs Form SLA, Shapeoko3 CNC, Palette+, Palette 2 Pro
- Software: Fusion 360, SpaceClaim Engineer, Simplify3D, Repetier Firmware & Host, VCarve Pro
- Software: Fusion 360, SpaceClaim Engineer, Simplify3D, Repetier Firmware & Host, VCarve Pro
Re: Config file for Repetier firmware builder
I posted one in my build log. You'll need to scroll down a bit http://forum.seemecnc.com/viewtopic.php ... &start=175" onclick="window.open(this.href);return false;
Let me know if anything needs changed
Let me know if anything needs changed
Re: Config file for Repetier firmware builder
Known working config file. Just rename to configuration.h
- Attachments
-
- Configuration-2.h
- (23.98 KiB) Downloaded 359 times
Re: Config file for Repetier firmware builder
How do you set the Z height with v0.92.3 ? I swear I saw it briefly in the LCD menu, but can't find it anymore.
I've got it set via the EEPROM but its far easier to adjust it via the LCD.
I've got it set via the EEPROM but its far easier to adjust it via the LCD.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: Config file for Repetier firmware builder
Not sure about which exact version I'm running, but on mine it's: click, scroll to advanced settings at the bottom, click, scroll to set z height at the bottom.Jrjones wrote:How do you set the Z height with v0.92.3 ? I swear I saw it briefly in the LCD menu, but can't find it anymore.
I've got it set via the EEPROM but its far easier to adjust it via the LCD.
So go to the bottom of the menu list, two layers deep, and you'll find it there.
Re: Config file for Repetier firmware builder
Ah, I got it.
I had changed the Z_HOME_DIR to 0 because I thought it was making the carriages move up into the limit switches after homing. But it also turns off the Z Calibration menu if its set to zero.
I had changed the Z_HOME_DIR to 0 because I thought it was making the carriages move up into the limit switches after homing. But it also turns off the Z Calibration menu if its set to zero.