Still Working on it.
Posted: Sun Feb 22, 2015 1:50 am
Hasn't been the simple kit I expected.
Welcome to the Forum!
The kit can take awhile to build and calibrate but you will feel great satisfaction when you turn on the power.
Welcome to the SeeMeCNC Community
Have a look around and join today!
https://forum.seemecnc.com/
Still Working on it.
Page 1 of 1
Re: Still Working on it.
Posted: Sun Feb 22, 2015 6:00 am
Re: Still Working on it.
Posted: Sun Feb 22, 2015 9:33 am
Definitely not simple, but parts are of high quality, the manual is awesome, and you have a band of helpers here! Forums describe it as a 20-30 hour build, plus calibrating afterwards. I see that as about the norm. Keep at it, don't loose hope!! The end is near! 
Re: Still Working on it.
Posted: Sun Feb 22, 2015 11:17 pm
I didn't find the build particularly difficult. It took me 12hrs, 26 min to build. I had to travel so I couldn't get straight to the calibration but I did that today and it took about 1hr 45 min. It was a lot of fun!