Welcome to the SeeMeCNC Community

My kit came with the Rev6 heating bed. Seems like the only change is that the thermistor is back in the center. Gene, any other things to be considered? Thanks. Mike

nope, you can do the same wiring as the rev 5, and yes thermistor in the center.... all good

Guanu

Thank you

guanu wrote:nope, you can do the same wiring as the rev 5, and yes thermistor in the center.... all good

Guanu

C'mon man when are you getting some red letters and a decent avatar! It's way too easy to miss what you say when you look like a generic user

McSlappy wrote:

guanu wrote:nope, you can do the same wiring as the rev 5, and yes thermistor in the center.... all good

Guanu

C'mon man when are you getting some red letters and a decent avatar! It's way too easy to miss what you say when you look like a generic user

I agree, guanu, you've got to get an avatar that stands out!

just because of you eagle... I cant change to the admin red, john would have to do that.... but this is a start

Guanu

guanu wrote:just because of you eagle... I cant change to the admin red, john would have to do that.... but this is a start

Guanu

NICE!!!!!

Just because of me? You honor me Sir!
Nice Avatar especially since you had none, and get on Steve's case to get your name in admin Red!

I'm custom... I'm now staff yellow because I like to be different

Yellow is good. It stands out better than red.
Now when we see that avatar we will know to stop, read and learn.
Thanks for your postings, you have been a great help to us all.

...or stop, point, and snicker.

g.

or keep making revisions so gene throws his glasses, whips his chair away and rage quits

Guanu

Ok, I'm confused. I have a Rev 5 but drilled out a hole outside (like in previous posts).

I have it all soldered up and ready to install.

Do I switch it back to the center? Geesh!!!

I just ordered a Rev5 from SeeMeCNC. are they shipping Rev6 now? What is the difference?

JohnStack wrote:Ok, I'm confused. I have a Rev 5 but drilled out a hole outside (like in previous posts).

I have it all soldered up and ready to install.

Do I switch it back to the center? Geesh!!!

no, rev 5 thermistor is the extra hole between traces.... rev 6 in the center (really only thing that changed was the heating traces so we can accurately use the center again) so you are good, no worries!

Guanu

guanu wrote: or keep making revisions so gene throws his glasses, whips his chair away and rage quits

Guanu

Gene has done an outstanding job for SeeMeCNC and you guys that work there should make sure that he is notified of upcoming revisions BEFORE they are made.
Besides, the cost of the glasses are starting to add up.

Notify me BEFORE a change? Madness I tell you! Pure madness!

g.

Here are a few pictures of the Onyx rev. 6 heating pad.
Front Back

Thanks for the pictures of the Rev6 Onyx.