Page 1 of 1
Failed to compile on initial startup
Posted: Mon Jul 07, 2014 1:23 pm
by khpeter
I just completed the build of my Rostock Max V2. The clear eeprom command worked but the next step (Repetier.ino) failed to compile.
This is the error report.
- Error report
Any guidance is welcome.
My compurter is an HP Pavilion dv7 with Windows 7 and a core I7 processor with lots of ram.
Re: Failed to compile on initial startup
Posted: Mon Jul 07, 2014 1:49 pm
by Polygonhell
What version if the arduino IDE are you using and what directory was the Lino file you loaded in?
Re: Failed to compile on initial startup
Posted: Mon Jul 07, 2014 2:03 pm
by LASERMAN
I got a bunch of errors on a compile once, and found out I had a setting in Ardruino wrong:
In the Arduino IDE, click Tools->Board and pick the entry marked “Arduino Mega 2560 or
Mega ADK”.
I don't know alot about these yet, but I thought it was worth a shot...
Re: Failed to compile on initial startup
Posted: Mon Jul 07, 2014 3:35 pm
by khpeter
I am using Arduino 1.0.5-r2
The directory and file is "C:\Repetier\Repetier.ino"
All of the accompanying files were unzipped into this directory also.
The eeprom_clear program works.
I have the settings for the serial port 6
and the board is Arduino Mega 2560 or Mega ADK on Com 6