TemperatureSwitch Module
Posted: Tue Jun 24, 2014 7:44 pm
Just wanted to let folks know that I contributed a Module to smoothieware: TemperatureSwitch
TemperatureSwitch is an optional module that automatically controls one of the small MOSFETs (through it's Switch) based on a configurable threshold temperature. It is commonly used to turn on/off a cooling fan or water pump to cool a 3D printer extruder hot end's cold zone. Simply, TemperatureSwitch turns on/off the switch.xxx where xxx is the used defined switch type. xxx = fan or misc in the default configuration files.
It is on the most recent edge source and firmware.bin
Cheers,
Michael
TemperatureSwitch is an optional module that automatically controls one of the small MOSFETs (through it's Switch) based on a configurable threshold temperature. It is commonly used to turn on/off a cooling fan or water pump to cool a 3D printer extruder hot end's cold zone. Simply, TemperatureSwitch turns on/off the switch.xxx where xxx is the used defined switch type. xxx = fan or misc in the default configuration files.
It is on the most recent edge source and firmware.bin
Cheers,
Michael