Hello from Montreal, Canada
Posted: Tue Apr 22, 2014 11:07 am
Hi guys,
I've just unpacked and assembled my brand new Orion. It's my first 3D printer and I'm new to the whole CAD thing.
As you can see my Orion is sitting on the bed of a CNC router. I've had it for about 2 months but barely had the time to work with it since I've been doing a bit of renovation in my house.
Since I've started to build RC planes and multirotors I needed some parts that are just IMO too expensive for what they are or they're simply not made. I should be OK to create them myself now
Sorry for the blury pic.
[img]http://upload.popolz.net/files/1/IMG_20 ... 102335.jpg[/img]
Alex
I've just unpacked and assembled my brand new Orion. It's my first 3D printer and I'm new to the whole CAD thing.
As you can see my Orion is sitting on the bed of a CNC router. I've had it for about 2 months but barely had the time to work with it since I've been doing a bit of renovation in my house.
Since I've started to build RC planes and multirotors I needed some parts that are just IMO too expensive for what they are or they're simply not made. I should be OK to create them myself now
Sorry for the blury pic.
[img]http://upload.popolz.net/files/1/IMG_20 ... 102335.jpg[/img]
Alex