Page 1 of 1
hello from Gardiner N.Y.
Posted: Tue Feb 25, 2014 4:50 pm
by Fester
Hey now I just purchased a Orion as my first printer Monday . I wanted to get the rostock max but I needed something to work out of the box ,if all goes as planed that's the second machine
. The learning curve is not so steep wondering if its a setting in hardware setup or software settings .. Any help would be greatly appreciated....
Mostly used for RC Hobby stuff .. Thanks again Fester
Re: hello from Gardiner N.Y.
Posted: Tue Feb 25, 2014 5:54 pm
by Eaglezsoar
Fester wrote:Hey now I just purchased a Orion as my first printer Monday . I wanted to get the rostock max but I needed something to work out of the box ,if all goes as planed that's the second machine
. The learning curve is not so steep wondering if its a setting in hardware setup or software settings .. Any help would be greatly appreciated....
Mostly used for RC Hobby stuff .. Thanks again Fester
Congratulations on purchasing the Orion. It is a great printer and I have one in my home.
After reading your message I am confused as to whether or not you are having a problem.
If you are having a problem please restate what the problem is and we will do our best to
help you with the problem.
Re: hello from Gardiner N.Y.
Posted: Tue Feb 25, 2014 8:49 pm
by Fester
Hey now ,no problems here . Thanks for asking . One of the reasons I purchased an Orion was the support and community.