Welcome to the SeeMeCNC Community

Posted: **Mon Sep 24, 2018 7:04 am**

I was looking at github this morning and noticed that there have been a few updates in;
SD card files for hotend probe/sys and in;
SD card files for hotend probe/www

A bit of a struggle (for ME) to figure which "matter" and which don't.
Looking for guidance and suggesting that some sort of organized "recommended updates" scheme might be a good thing to put in place.

Posted: **Mon Sep 24, 2018 8:06 am**

A good rule of thumb is, if it ain't broke, don't fix it.

Myself, in the beginning, I would update, just to update. Now? Only if I'm trying to solve a problem.

Posted: **Mon Sep 24, 2018 9:11 am**

Keep in mind that those aren't firmware updates - they're configuration file updates. You can take a look at the "diff" for the changed files in order to see what they changed and then decide if you want those changes.

g.

Posted: **Wed Sep 26, 2018 10:16 am**

Agreed, they are configs.
Diffs are OK, if only there where WHYs <grin>

Posted: **Thu Sep 27, 2018 9:08 am**

If you want to know the why of a change, email support. I'm sure they'd be happy to tell you.

g.

Welcome to the SeeMeCNC Community

When (& how) to update firmware.

When (& how) to update firmware.

Re: When (& how) to update firmware.

Re: When (& how) to update firmware.

Re: When (& how) to update firmware.

Re: When (& how) to update firmware.