Page 1 of 1
Greetings from Chicago
Posted: Thu Jan 19, 2017 8:20 pm
by ivanhandler
Just got my Rostock Max v3 last Friday. Made some mistakes which ruined my HE280, bummer. Now got the new one up and running and am printing some tests to see the best temperature to print at. Next, need to play with the retraction settings to see what I can do about stringing. Any help will be greatly appreciated.
Re: Greetings from Chicago
Posted: Thu Jan 19, 2017 8:47 pm
by mhackney
Welcome aboard. Lots of good info in the links in my signature - start there. With the HE280 NEVER use more than 2mm retraction or you will ultimately plug the hot end - which is a chore to clean out. You don't mention what filament you are using but I''d guess PLA given the mention of stringing. My link has recommendations for minimizing stringing. Start with extrusion temperature - you want to start as low as possible.
Re: Greetings from Chicago
Posted: Sun Jan 22, 2017 4:45 pm
by Penged
Welcome aboard. I live in the south suburbs. It's nice to see I'm not the only one in the Chicago area with a MAX. Perhaps we could get together and compare notes. I would also recommend attending MRRF. The experience is not to be missed.