Hello from California!

Gundy1024 · Post by **Gundy1024** » Mon Apr 20, 2015 10:45 am

Ordered my Rostock V2 on Saturday, now the waiting begins. I look forward to the build and all the help you all can give me along the way. Any thing I need to make with my current ROBO 3D R1 that will help me along the way? Thanks in advance!

Post by **Eaglezsoar** » Mon Apr 20, 2015 12:42 pm

Gundy1024 wrote:Ordered my Rostock V2 on Saturday, now the waiting begins. I look forward to the build and all the help you all can give me along the way. Any thing I need to make with my current ROBO 3D R1 that will help me along the way? Thanks in advance!

Hi Gundy1024 and welcome to the Forum!
While waiting for your printer to arrive you can download the assembly manual and browse through it.
There is a Peek Fan housing that needs to be printed (you can find it in the manual) and you could use the Robo3d to print it in ABS.
The manual can be found here: http://download.seemecnc.com/rostockmax ... dition.pdf
Have a great build and send us some pictures if you can.

mvansomeren · Post by **mvansomeren** » Mon Apr 20, 2015 1:19 pm

Gundy1024 wrote:Ordered my Rostock V2 on Saturday, now the waiting begins. I look forward to the build and all the help you all can give me along the way. Any thing I need to make with my current ROBO 3D R1 that will help me along the way? Thanks in advance!

Whereabouts in California are you located? I'm in SoCal.

Lots of good information and help is available on the forum. I agree with Gene's suggestion...read through the manual a couple of times. It really does help prepare you for a successful build.

Gundy1024 · Post by **Gundy1024** » Mon Apr 20, 2015 5:14 pm

Mvansomersen, I am about 1 hour north of Palmdale CA.

Eaglesoar, I have the manual printed out and will get my ROBO to work printing the parts needed for the build. Thanks for the info and I will be more than happy to take pictures of my build process. I have yet to use ABS on the ROBO so that will give me something new to try along the way.

3D-Print · Post by **3D-Print** » Mon Apr 20, 2015 9:58 pm

Welcome to group!!

You will have a blast with the build and all the prints. The group here is amazing and is an awesome resource for everything!!

Gundy1024 · Post by **Gundy1024** » Mon Apr 20, 2015 11:31 pm

Got shipping info, should be here on Friday! YAY!

Gundy1024 · Post by **Gundy1024** » Tue Apr 21, 2015 11:38 pm

Well, got my fan shroud printed. Ordered the motor isolators, some colored cable sleeves and the reversible USB adaptor I saw in the forums.

Is there a second fan shroud I should be printing? I see that some people have a print fan with a printed shroud.

Thanks

Welcome to the SeeMeCNC Community

Hello from California!

Hello from California!

Re: Hello from California!

Re: Hello from California!

Re: Hello from California!

Re: Hello from California!

Re: Hello from California!

Re: Hello from California!