Need a filament fix - where?

Here's a place to share with others local to you
Post Reply
User avatar
Captain Starfish
Printmaster!
Posts: 950
Joined: Tue Dec 10, 2013 5:24 am

Need a filament fix - where?

Post by Captain Starfish »

Sadly, now that McSlappy has McSlapped the doors closed at DoDadDoes and moved onto other projects, I find myself in search of a new dealer for the good stuff.

Any recommendations for an Aussie supplier of halfway decent ABS and Nylon filaments?
geneb
ULTIMATE 3D JEDI
Posts: 5352
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Need a filament fix - where?

Post by geneb »

When did this happen?

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
User avatar
Captain Starfish
Printmaster!
Posts: 950
Joined: Tue Dec 10, 2013 5:24 am

Re: Need a filament fix - where?

Post by Captain Starfish »

Last year sometime?

I haven't been using the printer much and had stocked up, so it came as a bit of a surprise when it was all closed up.

Speaking with him, seemed the payback wasn't there for the crazy hours it was chewing out of his life to keep the site and customers well supported and he moved on to other things.
geneb
ULTIMATE 3D JEDI
Posts: 5352
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Need a filament fix - where?

Post by geneb »

That's a shame. Customer service can be a HUGE time sink and it's hard to do well without dedicated staff.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
User avatar
forrie
Printmaster!
Posts: 159
Joined: Wed Apr 16, 2014 7:15 am
Location: Crab Nebula

Re: Need a filament fix - where?

Post by forrie »

I remembered he posted a closing down message on the site, so checked the internet wayback machine and found;
Where do we buy stuff now? Well I like Jamie from http://3dprintergear.com.au/ so contact him if need any filament – he’s got the nice ABS/PLA that we sold.
I'm not an alcoholic...I'm Australian!
Post Reply

Return to “Australia and New Zealand”