Welcome to the SeeMeCNC Community

sharpie-on-pla-DSC_2932.jpg OK... I just couldn't splain how good this colored t-glass looks :) This is how I sharpie-colored the Tiki man t-glass. In the photo I used PLA for its contrast. You can see it is a small thin stripe. That lil thin red stripe made the gold color on the tiki man. Now the ...

Backlit with a white LED and tilted a bit.

gold tikiman-DSC_2904.jpg Ummm... I use a Sharpie :) If you mark only 1 side of the filament it gives a really good optical effect as you tilt it up/down. Diff effects depending on what side you mark. Colors may change when you print, red sharpie makes a good Gold :) You can see the color through ...

t-glase-vase-No-1-2-3-DSC_2892.jpg The larger one ... I bumped up the speed to (30mm/s) x 120% and bumped the temp up to 220. The first 3 layers don't like the speed. Had to do them at 30mm/s and slicer slows it down to 30% of that so 10mm/s on them. Looking at them real close I can't see any diff ...

t-glass-vase-done-002DSC_2867.jpg t-glass-vase-done-DSC_2868.jpg 30 mm/s, 215 hot end, 60 on the bed till the bottom 3 layers were down then dropped to 40 for the rest of the print. 0.3mm layer, vase setting in Slic3r. It has a hologram effect to it, changes as you tilt/turn it. I am very happy ...

just can't get the photo to show how awesome this looks.

http://www.amazon.com/Parts-Express-Sol ... UTF8&psc=1
One of my "must have" tools

When I had a problem like this ... I had to put a fan on the Rambo to keep the driver cool.
I tried every speed and setting , the faster I ask it to go the more clunking noise it made.
The fan made it work like it should.
YMMV

Ya know, sometimes I just don't have a choice :) I would rather someone fix a problem that for everyone go and hide from it. If we don't speak up no one would know there is a problem. I don't have the "know how" to fix it. I have an up to date system, SSD drives, lots of memory, debugged all I can ...

2 in a row for me, Repetier, version 0.90, USB. No errors or nuttin
Once 2 hours in to a 5 hours print, and once on the 20th layer of a 4 hour print.

One "may' have been while Win7 was downloading a new update. The computer didn't reboot but the notice was there to reboot.

geneb wrote:More importantly, where did you get the hot end? That's a lot longer than the stock hot end and the nozzle is longer as well.

g.

Missing spacer?

glass

I have only used hairspray, Aqua-Net, have printed 4.2 kg of PLA and ->never<- had a print lift.
I didn't say that out loud, I'm sure my Max didn't hear me

What $4.96 got me.....
Then I was thinking....
View results here
https://vimeo.com/73651945

I don't know so I'm a askin :) Why are you "bonding" the balls to screws? You use a magnet on the arm... why not on the effector. The ball would be between the 2 magnets and... the "bond" strength of 2 magnets with it's poles in line would be stronger upon the ball. ==( )== ? I'll go now :)

Page 22 to 25 in the Rostock-MAX-Assembly-Guide.pdf

I watch it in Hi-def on my 32 inch monitor from my easy chair

Print #2
https://vimeo.com/72410358

Thanks geneb, I did what you said and all is well :) UPS dropped off my Rostock Max 7 days ago, This is the first "dry-run" it is the calibration cube, just a few cuts from the 15+ min video. I am so happy at this point! I'll take good care of my new Aircube! It looks and sounds good to me. If you ...

Thanks!
I'll let ya know how it went

firmpromset.jpg Are my eeprom / firmware / config files corrupt? In RH, after many crashes when I trire to opened firmware eeprom config It let me in a few times. I did manage to set the z height max. then did a M500. I did G28 and the LCD showed the proper z max height. (first time in past 3 hours ...

Eaglezsoar, thanks for the thumbs up , lots of hard work went into it :) A few things I am sure to change.... I will at some point rewire the whole setup. The Rambo board bay is clean, but hidden in the other bays are the excess length of wire. also add connectors for the hot end wires. Magnetic ...

While doing the PID config.... I set the extruder, then went to edit the bed pid and RH crashed. Restarting RH, I can send g28 and also make manual moves. When I click on firmware eeprom config, RH crashes I reverted back to a new fresh copy of configuration.h Restarting RH, I can send g28 and also ...

First Moves.
I have heat and x-y-z moves

https://vimeo.com/72119206