Welcome to the SeeMeCNC Community

Ok guys,

The Digi theme is back up. You'll have to go to your user control panel and choose the theme Digi

Geneb messaged me the natives were war gathering this morning No worries guys, just had to roll up our php and phpBB stuff. I'll be finishing it up this morning and the precious dark blue theme will be back. On that note, if you see anything different in the next few days that DOESNT work, post it ...

Someone should print this thread and send it to the family. I spoke with his son on the phone last week and his wife via email, and gave them both links to this thread. His son mentioned he would probably be joining the forums after a while as he was really curious to pick up where carl left off ...

***** UPDATED to add STL of carl from last years MRRF ***** Thanks to Kevin from Kalamazoo, he found a scan he did of carl at MRRF last year. I'll upload it here so you can DL and print eaglezsoar.zip ***Updated*** His obituary can be found at http://www.cremateohio.com/notices/Carl-LittleJr ...

Is there something special that matter controller does or can I use octoprint instead? You sure can use octoprint/repetier-host/simplify/ANY host software that has a terminal window that you can read the output from the machine on. As @partdaddy said, we write our docs based on the software that is ...

First off, a huge thanks to one of our members on the forums here DC42 for his work on the delta least squares calibration code. He's given us permission to modify and adapt his code to more easily implement it with our probe and firmware. We've modified his online calculator and it is now available ...

Hey mac. It sure will. It's changes to the actual code not the machines themselves.

G30 is very useful to set Z max height, I would suggest not deprecating it. Yes it is Michael. We won't be depreciating ANY of the individual M codes, in fact they will be made whole again if Ryan (pouncingiguana) hasn't already ;) You'll still be able to run them individually if you want/need to ...

With my he280 upgraded Rostock Max V2 do I need to invert the Y motor like all previous versions? Also I have 300mm arms do I need to change anything for them? Derstig. See my previous post. Dev branch or unstable branch as well as non-OEM parts are in the 'blaze your own trail" category. You have ...

Hey there Devdev, The dev and unstable branches should be considered for advanced users only. Both of those branches come with little to no official support yet, until those changes are commited to the 'master' branch. That said, if you're unsure of what values to enter in firmware files or not sure ...

Hey guys!

Sale starts tomorrow. Save 100 on Rostock MAX/Orion, $50 on Eris/Droplit
15% off filament code filament15
10% off all parts/accessories code blackfriday10

one coupon per order, but you can use the code as many times as you want just can't combine them on an individual order.

Hey guys, here's a dev release of firmware for anyone whos comfortable testing. It does some new stuff with probing, like comparing taps, incrementing sensitivity and other things. Ryan will be along shortly to elaborate

Hey guys. Just a post to let you know we're posting stuff on github to a few branches for firmware fixes/updates/bug hunting etc... For everyones sanity, here's what they are and when to use them Master: This branch is what we could consider "stable" and is the officially supported firmware. This ...

As far as I know, there is no way to void the Rmax or Eris warranty other than provable deliberate damage

You are correct sir

Hey Q, Yes, there's a resistor in that LED circuit already. Drop on an led and you're good to go! NOTED ON THE UNLABELED thermistor holes guys. We'll add that into the next rev of boards. Yes, there is a trace cut on the boards, near the center ring. It's intentional. That trace connects the hotend ...

More whips are added to inventory now. And you are correct Penged, the HE280 nozzles are different, and will be on the website soon!

Thanks guys!

To everyone waiting and waiting and waiting, WE JUST POSTED THEM ON THE WEBSITE!!! The first 50 are on sale for $109 for the hotend kit. Most of you guys are handy enough on here to make your own wiring, but you'll need one of the connectors for the whip if you want to make up your own wiring ...

Hey 626, All good points. A few i'll touch on. In case you're wondering about fans, how's this look? 14138155_1086734298030082_1701889686908936482_o.jpg Calibration with the probe on Rostocks seems to be working much better. I wish i had a more scientific answer other than "longer arms maybe?" or ...

Hey guys! We're getting ready to head up to the motor city for this years MakerFaire. If you can, come out and see us. We'll have the PartDaddy set up again, and we'll have some other 'things' that we've been working on as well. AND if you can't make it, just an FYI, we have a 10% sale this week ...

Hey Holy1, We're (SeeMeCNC) not sure who messaged you and told you this is strictly a delta forum? We don't care who posts what on here, especially if it's something YOU MADE!!!! ;) The only thing we're against is the blatantly obvious spammy posts from people that their first post is a "hey look ...

LOL. I think everyone can see it now, if i set permissions correctly
https://www.facebook.com/johnoly99/vide ... 712781389/

Good feedback so far guys. Couple notes: ON the hotend temps. Yes, we've already documented the 220c being better on average than 215. It IS a metal hotend, even though it's lined with PTFE. All metal hotends with small heating blocks require a slightly higher temp for printing than comparable ...

Added a video to the first post on this topic showing how the liner in the hotend (the actual bowden tube) goes together.

Milamember,

Thanks for the feedback on that. We'll make sure to include checking the connection there on the quick start guide that goes in the box. Other than that, pics of prints????

OK guys, we're working on the documentation side of things here. If you go back and look at the first post in this topic, you'll find i just added a youtube video on how to setup and add the default files to mattercontrol for the eris. Take a look and comment back and let us know if you find any ...