Welcome to the SeeMeCNC Community

One last follow-up. It looks like the real magic was bumping the Extr1. PID drive max in the EEPROM to 255. Did that while the printer was struggling to achieve the correct temperature and it then bounced up like I wanted.

Thanks! So looking at the code, all heaters are turned off before auto-tune starts, so it seems like it shouldn't matter what the bed temperature is. Having said that, I did run the bed up to 90 and then run auto-tune at 245. The D value was much larger than I'm used to and watching the extruder ...

I'm trying to get the E3D V6 hotend to 228 and the bed to 90. It won't happen. Hotend stops at 225.6 and bed around 80. Playing around, I took the bed to 90 with the hotend set at 150. Bed got to temp. Then set the hot end to go to 228. It wouldn't go past 225.6 (actually bounces between that and ...

Yay! First prints. Did the "Calibration - Box" that was automatically queued in MatterControl at install time and the PEEK and layer fan shrouds. Mostly pretty good. Did have some filament seepage issues on the PEEK shroud. With the PEEK shroud installed, the layer shroud looks real good (I'm hoping ...

So after one day, I've got the power supply in. I've found that the differences between my October kit and what is shipping now are enough that using the 4th edition assembly guide is just a little confusing. I've taken to reading both 3rd and 4th editions to be clear on steps, but using the 3rd ...

Hi all. Just started building the Max V2. I received my kit a month or so ago, but was waiting till today to start (first day of me being unemployed, but don't worry, I have a new job lined up for January) . I was excited to see a new edition of the manual, but quickly noticed that my power supply ...