Welcome to the SeeMeCNC Community

Here is my update that fixed all the problems. It is quite a process but follow it closely and you will get great prints: 1. Using Arduino IDE clear the EEPROM and upload the Rostock MAX firmware. Make sure you change configuration.h to use Rostock Max V2 or what ever printer you have. http ...

I have had the same problem. I upgraded the cheapskates, PSU, new HE280 print heat with accellerometer, ball joints and whip. Once I sent a calibration request G29 to the printer to start calibration it would sometimes double hit the towers or grind into those locations but at some point it would ...

I changed the extruder motor to a Wantai and the motor is running cool and perfect. I have decided to change all the motors to Wantai as the tower motors are running hot aswell. If SeeMeCnc supplies you with anything other than Wantai motors, it is best to change them out to save a lot a time and ...

Thanks for the info. I used a large fan to cool them down but I will change the current. I have had to several times unjam the extruder with chewed up filament but that may have been the filament melting with the high heat. Has anyone used a dedicated mini fan to cool the steppers and if so which ...

What is the correct adjustment I need to make to the firmware to stop the Ezstruder stepper motors from overheating. They are burning hot. They are MODEL: 42BYGHW81. It is melting the filament on small prints. I have been using a large fan to cool them.