Welcome to the SeeMeCNC Community

I do not know if anyone else has used these methods but I have been for about 1 year. The enclosure for my Rostock Max v2 is a clear shower curtain mounted around the top with magnets. The enclosure has helped prevent warping of ABS a quite a bit. To speed up the bed and extruder heat-up time I have ...

I want to print 4 of the same small part in one run. How may I do this in matterControl.

Wonderful, I assume you will let us know what the problem was.

I was, as well as many others, having a long wait for the bed heating up. I tried the hot pad rag over the bed and also a lid from a large frying pan. Both helped but I also wanted to try something else. I purchased a 150 watt infrared heat bulb from a pet store. It came with a wire frame, socket ...

Just completed the build of Rostock Max v2 and think I have the same issue. Possibly not as bad as some of the others but it is not right. It is taking forever to reach 90 degrees for the first print. More than an hour and it is still climbing but the curves are almost parallel I was holding at 89 ...

I am using Arduino 1.0.5-r2
The directory and file is "C:\Repetier\Repetier.ino"
All of the accompanying files were unzipped into this directory also.
The eeprom_clear program works.
I have the settings for the serial port 6
and the board is Arduino Mega 2560 or Mega ADK on Com 6

I just completed the build of my Rostock Max V2. The clear eeprom command worked but the next step (Repetier.ino) failed to compile.
This is the error report. Any guidance is welcome.

My compurter is an HP Pavilion dv7 with Windows 7 and a core I7 processor with lots of ram.