Welcome to the SeeMeCNC Community

Success! OK, I took several steps back. I downloaded the latest version of the manual. I started with the new fan shroud section and re-calibrated everything. I was able to print and mount both fan shrouds with fans. I reconfigured the slicer with the supplied files. No my prints are meeting the ...

Your fan question spurred me to download the latest copy of the assembly manual. It now contains the fan shroud and mounting information.

I'll reprint and post the latest pic of my USB cube after I get the fans into position.

Thanks for the assist!

I'll try adjusting the setting. I'm not using either fan since there was nothing in the instructions on how to mount them. As you might have guessed, I'm new to this and many posters have said they never use a fan for ABS. Anyway I have both set of wires connected to the board and running to the ...

Same result, sort of. it's no longer a cube 19.35 X 18. The interior width of the slots is down slightly to 9.3. But I like where you are going. So I chiseled out the inner wall of one of the slots. Now it measures 12.3 x 5.8 and the USB fits, all be it tight. So do you think is my issue lies in the ...

I'm using the Rostock Max V2 with 1.75 ABS and w/o modifications. After printing several items from Thingiverse I thought I take a shot at developing my own using FreeCAD. Once the small USB holder was complete I exported the FCStd as a stl, opened it in Repetier-Host, sliced and printed it. On the ...

I have been printing for a little over a week and the printer has been working great since the first print. But I discovered an issue today with prints being slightly off from the design. I tried to print a USB holder I created in CAD. The print was to be 20mm by 20mm, which was slightly off at 19 ...

Well I got mine built and calibrated today (minus the fans). Don't know how to actually print anything as I built it for my wife. Can anyone recommend a first test print/walk-through?

How far have you gotten? I'm up to page 121 and hit a road block. After attaching the hot end there are no instructions on what to do with the 26ga wires. There's a reference to using them for the PEEK and part fans, but nothing on where to mount them.