Welcome to the SeeMeCNC Community

@polygonhell what hotend temp should i be working in, while i dial in the retraction settings? @bubbasnow. I was printing at 30mm. Are you talking about the kiss print? The print only had one layer at the bottom and top of the base. I suspected it drooped cuz there was no support. I didnt want to ...

so i tried to print the hollow pyramid. Left to right. you can see my shortcomings. The plastic trails while bridging different objects is killing me. I tried retracting in Slic3r, had it set to 10 and the gears broke the filament in half. set it to 5 and 6. The retraction on the last print ...

Repetier-host keeps resetting xyz max length in the eeprom to 0 problem happened when i was trying to adjust the max length in the printer settings while connected. usually its greyed out if ur connected, but i clicked on the button on the top right corner and it took me into printer settings. I hit ...

Hi guys.. Just finished assembling my Max a couple of days ago. Here are my first attempts. My failed attempts at the hollow cube. Left to right. I had a problem with one of the axis motor twitchingafter awhile of printing. It would cause an offset in the prints towards the motor with the problem ...