Polyflex with Rostock Max V2

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
Johncoffee
Printmaster!
Posts: 87
Joined: Tue Feb 23, 2016 6:25 pm
Location: Switzerland

Polyflex with Rostock Max V2

Post by Johncoffee »

Just wanted to share the Extruder modification of my stock extruder on the Rostock MAx V2 when printing with flexible filaments like Polyflex: After jamming the filament indside the hobbed wheel - I've printed this modification on from Thingiverse.

http://www.thingiverse.com/make:268295

It works really great !
IMG_0661.JPG
IMG_0660.JPG
Attachments
IMG_0659.JPG
User avatar
joe
Printmaster!
Posts: 275
Joined: Tue Jun 28, 2016 10:05 pm

Re: Polyflex with Rostock Max V2

Post by joe »

Hey that looks good. I have great success with ninjaflex with this : http://www.thingiverse.com/thing:1494685
Johncoffee
Printmaster!
Posts: 87
Joined: Tue Feb 23, 2016 6:25 pm
Location: Switzerland

Re: Polyflex with Rostock Max V2

Post by Johncoffee »

Seen your solution too - it appeared too complicated for me ;-)
The result with the simple approach I'm using is stunning. It prints really well with Polyflex.
IMG_0677.JPG
IMG_0680.JPG
IMG_0679.JPG
Post Reply

Return to “General Tips 'N Tricks”