![Wink ;)](./images/smilies/icon_e_wink.gif)
The good:
- It is 100% bone stock and has printed around 1kg of filament, so not a lot of use.
- Will come in the original box with about 1/2 of the blue PLA spool that was included.
- Updated to latest firmware a month or so ago
- Mine seems to generally calibrate fine, although sometimes the printing plane will be tilted with a low point opposite the Z tower.
- Has a SeeMeCNC sticker on top!!!!!!!!!!!!!!!!!!!!!!
The bad:
- The build surface has some PETG that is bonded a bit too well. Still works fine, but doesn't come completely clean.
- Some plastic has oozed around the nozzle threads, leaving burnt plastic residue
Asking $400 and I will deliver for free anywhere within about 100 miles of 06339 as long as it does not involve driving into NYC or Boston. Otherwise we can work out shipping.