Rostock Max V2 For Sale

[joe]

Is there any interest from anyone in Ontario for a used Rostock Max V2 for $700.00 CAD? Mostly stock, Pei Bed, Stepper Dampeners, Custom Cheapskates.

[Tincho85]

Could you tell us more about those cheapskates?

[joe]

Could you tell us more about those cheapskates?

It didn't make sense to me that the stock cheapskates pull from the sides of the aluminum extrusion so I made up these carriages. I had some left over openbuilds v-slot wheels from another project that fit in the slot very nicely. The effector weight is now balanced from front to back. I also incorporated at built in belt adjustment cam on one of the belt anchors so belt tension is super easy. Just give a twist with a 9/16 (14mm) wrench.

The shortness of the old cheapskates allowed it to rock pretty easy. The ones I made are much longer and moves smoother. The over all weight is about 50g lighter too.

[Tincho85]

Lighter? Nice, they do look heavier.
Good job, I love watching other mods.

[geneb]

When properly adjusted, the old style Cheapskates don't move at all. That being said, the new injection molded carriages are MUCH better in every regard.

g.

[joe]

When properly adjusted, the old style Cheapskates don't move at all. That being said, the new injection molded carriages are MUCH better in every regard.

g.

I am aware of the benefits of the the new carriages. No need to defend the old style. The ones I made are almost 2 years old.

Lighter? Nice, they do look heavier.
Good job, I love watching other mods.

Thanks Tincho85! Mods are fun.

[joe]

just bumping this. I'm thinking $500 CAD.

[Qdeathstar]

that's not a bad deal, but i think most people here already have a printer or few,.. i'd try the reprap forums... hang out in the "cheap chinese import" section and then when they show you a picture of their imitation ramps board and arduino melted together you can offer this printer as suitable replacement for about the same price... although i did see on aliexpress deltas can be had for $160....

[joe]

that's not a bad deal, but i think most people here already have a printer or few,.. i'd try the reprap forums... hang out in the "cheap chinese import" section and then when they show you a picture of their imitation ramps board and arduino melted together you can offer this printer as suitable replacement for about the same price... although i did see on aliexpress deltas can be had for $160....

Yeah, I've got 4 printers, That's why I want to get rid of one. I will take less than 500 if need be.

[EddyGara]

would you be willing to ship too the usa?

[joe]

would you be willing to ship too the usa?

Sure, if you pay the shipping and pay in us dollars.

[joe]

Bumping this. $450? There has to be someone in the Toronto area?

[DeltaCon]

That's a better deal than I had when I bought mine 2nd hand, and it has a lot more nice options. It is worth a lot more than what you are asking.
Sure someone must have interest!

[Edwii]

Hello, I'm possible interested in your printer.
Would it be possible to contact you via email or phone?
I'm in BC, couple hours outside of Vancouver.

[joe]

Hello, I'm possible interested in your printer.
Would it be possible to contact you via email or phone?
I'm in BC, couple hours outside of Vancouver.

Sent you a PM.

[joe]

This is still available.

[joe]

Just bumping this. Still available.

[Eatstone]

PM sent.

[joe]

This is still available. Only in Ontario , Toronto area please. I live in the Peterborough area so in that radius. I really don't want to tear it down and go through the hassle of shipping. Not for $450.00.