Sorry for the lack of information.
But I'm printing with:
0.4 Nozzle
3 fans mounted on Effector
ABS
Infill, solid, top solid = 30 mm/s
perimeters = 30 mm/s
gap fill = 30 mm/s
travel 200 mm/s
first layer speed = 15 mm/s/
hot end temp = 245 degree
bed temp = 80 degree
(I cant get my bed above that for some reason)
Part:
http://www.thingiverse.com/thing:22263" onclick="window.open(this.href);return false;
I also have a canola oil cartage before the extruder motor.
nebbian, I would love to try using your settings.
Thanks again fellas.