Diagnoal Rod length

A pre-assembled Delta Printer that can print a 6" cube 8" tall!
Post Reply
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Diagnoal Rod length

Post by Fester »

I would like to know the default factory setting on diagonal rod length . I may have changed by mistake when adjusting the Horizontal radius. I have 178mm now :oops:
User avatar
Jimustanguitar
ULTIMATE 3D JEDI
Posts: 2631
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Diagnoal Rod length

Post by Jimustanguitar »

269mm (for RMaxV2, nice catch, Earthbound!) The Orion is shorter.
Last edited by Jimustanguitar on Tue Mar 03, 2015 2:29 pm, edited 1 time in total.
Earthbound
Printmaster!
Posts: 458
Joined: Sun Sep 07, 2014 2:39 am

Re: Diagnoal Rod length

Post by Earthbound »

178mm is factory setting for the Orion.

269mm is factory setting for the Rostock Max.
"Trust no quote from the Internet." - Abraham Lincoln
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Re: Diagnoal Rod length

Post by Fester »

Thank you .
Post Reply

Return to “ORION”