Anyone updating the RepRap wiki page, is welcome to transfer any of this information. As of this posting date, we have begun shipping 4 axis control boards to make connection easier.
Using the 3 axis board with EasyDriver (4th axis), copy this file to the mach3 installation directory on your computer:
http://seemecnc.org/assembly/Slic3r%20Profile.xml
After putting this profile in the Mach3 installation folder, start Mach3 using the "Mach Loader". You will see "Slic3r Profile" in the list, click on it, Mach will start and all the settings will be correct.
==================================
This next file is a Slic3r configuration. I'm posting it here because all of this stuff works together. I am also going to post it in the other areas on our forum.
Oly & I keep these right in our STL folder where we keep our parts. Choose "load profile" after you start Slic3r. Usually, Slic3r is installed on a separate computer for g-code generation.
==================================
Here's a photo of the 3 axis board with easyDriver and wiring. This photo is also at http://seemecnc.org/assembly
ElectronRanchers photo of jumpered opto-isolators. Reference to Matt's Misc Photo album on the "SeeMeCNC YaHoo Group".
Mach3 - 3Axis Board with easyDriver Configuration
Mach3 - 3Axis Board with easyDriver Configuration
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
-
- Site Admin
- Posts: 23
- Joined: Fri Mar 23, 2012 3:41 pm
-
- Printmaster!
- Posts: 99
- Joined: Wed Jun 06, 2012 3:59 pm
Re: Mach3 - 3Axis Board with easyDriver Configuration
ok my brain is fried and i need clarification on how do i get the files into mach3 when i click link it gives me long file and i tried to copy paste into but nothing will move over.
Re: Mach3 - 3Axis Board with easyDriver Configuration
Right click, and save link as. For the slic3r ini file, aave it into a folder in slic3r directiory, you will point to it when you click load config im slic3r
Re: Mach3 - 3Axis Board with easyDriver Configuration
Hi,
Just wondering if you could help with the mach-3 config .xml file, I can't seem to download it. I'm also in need of some help with the configuration file for the tb6560 without the easydriver attached, I have one of three motors turning, the Y-axis.
Any and all help greatly appreciated.
Just wondering if you could help with the mach-3 config .xml file, I can't seem to download it. I'm also in need of some help with the configuration file for the tb6560 without the easydriver attached, I have one of three motors turning, the Y-axis.
Any and all help greatly appreciated.
PartDaddy wrote:Anyone updating the RepRap wiki page, is welcome to transfer any of this information. As of this posting date, we have begun shipping 4 axis control boards to make connection easier.
Using the 3 axis board with EasyDriver (4th axis), copy this file to the mach3 installation directory on your computer:
http://seemecnc.org/assembly/Slic3r%20Profile.xml
After putting this profile in the Mach3 installation folder, start Mach3 using the "Mach Loader". You will see "Slic3r Profile" in the list, click on it, Mach will start and all the settings will be correct.
==================================
This next file is a Slic3r configuration. I'm posting it here because all of this stuff works together. I am also going to post it in the other areas on our forum.
Oly & I keep these right in our STL folder where we keep our parts. Choose "load profile" after you start Slic3r. Usually, Slic3r is installed on a separate computer for g-code generation.
==================================
Here's a photo of the 3 axis board with easyDriver and wiring. This photo is also at http://seemecnc.org/assembly ElectronRanchers photo of jumpered opto-isolators. Reference to Matt's Misc Photo album on the "SeeMeCNC YaHoo Group".