SeeMeCNC Orinon Printing Objects Does not Square and Have Gaps

A pre-assembled Delta Printer that can print a 6" cube 8" tall!
Post Reply
LuanNguyen
Noob
Posts: 1
Joined: Tue Dec 24, 2019 6:31 pm

SeeMeCNC Orinon Printing Objects Does not Square and Have Gaps

Post by LuanNguyen »

Hello all,

I'm completely new to 3D printing and a have a hard time adjusting my printer. The file that I print does not square and has big gaps (picture included). My printer is SeeMeCNC Orion V2 and I use ABS 1.75mm filament. Thank you.
Attachments
3d.jpg

geneb
ULTIMATE 3D JEDI
Posts: 5141
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: SeeMeCNC Orinon Printing Objects Does not Square and Have Gaps

Post by geneb »

Printing with ABS is 3D printing on "hard mode". I would suggest you learn on PLA before moving up.

What slicer did you use for the model you show? Is the printer 2nd hand?

tnx.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “ORION”