Rostock MAX v2 : Ultimaker Cura 4.x Machine Settings Profile?

Discussions related to the Rostock MAX v2
Post Reply
benjaminhill
Prints-a-lot
Posts: 25
Joined: Thu Jun 30, 2016 9:19 pm

Rostock MAX v2 : Ultimaker Cura 4.x Machine Settings Profile?

Post by benjaminhill »

Any users of Ultimaker Cura 4 that are willing to share their Rostock MAX v2 Machine Settings (Profile)?

Cura has a MAX 3.2 definition, but I'm hesitant to use that one.
I'd also be just as happy with a screenshot of your "Machine Settings" tabs.

Thank you!

geneb
ULTIMATE 3D JEDI
Posts: 5143
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Rostock MAX v2 : Ultimaker Cura 4.x Machine Settings Profile?

Post by geneb »

You can use the 3.2 profile, just change the travel speeds to under 200mm/sec and you should be fine.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “Rostock MAX v2”