Rostock max V2 Keeps restarting

Having a problem? Post it here and someone will be along shortly to help
Post Reply
turi80
Noob
Posts: 2
Joined: Sat Jul 20, 2019 8:00 pm

Rostock max V2 Keeps restarting

Post by turi80 »

Hi,

When I turn my machine on, it just constantly goes from the startup screen to the home screen on the LCD , like a loop. It just keeps doing it every 30 secs or so.

I am not very good with electronics, but to my best of my abilities I managed to isolate the problem to the usb connector. It only does the loop when the usb cable is plugged.

the printer actually works, it prints and everything.

Any insights will be greatly appreciated, Is my mobo done? What should I do?
thank you for your time.

geneb
ULTIMATE 3D JEDI
Posts: 5162
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Rostock max V2 Keeps restarting

Post by geneb »

You might want to contact support on this - [email protected]

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Xenocrates
ULTIMATE 3D JEDI
Posts: 1561
Joined: Wed Sep 23, 2015 2:55 pm

Re: Rostock max V2 Keeps restarting

Post by Xenocrates »

If the USB cable is worn, or either port, then as the connection is made and broken, arduino based boards will reset to allow updates. It may well just be the cable. Does this behavior happen with other cables, or other USB ports on your computer?
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi
01-10011-11111100001

turi80
Noob
Posts: 2
Joined: Sat Jul 20, 2019 8:00 pm

Re: Rostock max V2 Keeps restarting

Post by turi80 »

Thank you for responses,

I have tried different usb cables and yes, it still does the same.

Post Reply

Return to “Troubleshooting”