HE280 keeps unplugging mid print.
i have had this happen on my rostock 2 3 times now
are there any thing available to keep this plug from disconnecting ?
HE280 keeps unplugging mid print
-
- Plasticator
- Posts: 13
- Joined: Fri Sep 23, 2016 12:58 pm
-
- Prints-a-lot
- Posts: 33
- Joined: Wed Nov 23, 2016 3:30 pm
- Location: Cambridge, MA
Re: HE280 keeps unplugging mid print
There's a model for a clip you can print. That solved my unplugging issue.
I don't have a link to the model.
Maybe someone can find it and link to it for others.
I don't have a link to the model.
Maybe someone can find it and link to it for others.
Re: HE280 keeps unplugging mid print
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- bvandiepenbos
- Printmaster!
- Posts: 927
- Joined: Thu Apr 05, 2012 11:25 pm
- Location: Goshen, IN
- Contact:
Re: HE280 keeps unplugging mid print
Sure you can print a clip, it works. but a much cleaner solution is to replace OEM plug with this LOCKING connector...
http://www.themakerhive.com/shop/viewit ... oductid=39
http://www.themakerhive.com/shop/viewit ... oductid=39
~*Brian V.
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"
RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"