Nozzle thermistor failed
-
- Printmaster!
- Posts: 77
- Joined: Wed Jan 18, 2017 4:39 pm
Nozzle thermistor failed
I can no longer get a temperature reading from the Eris. I cleared a jam out of my extruder and then the thermistor stopped working at the beginning of a print. No idea of what happened. Any ideas on how to fix this without buying a new hotend??
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: Nozzle thermistor failed
Just buy a new thermistor from their website. Keep track of your dissasembly, and if you have good soldering skills, you will be fine.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
-
- Printmaster!
- Posts: 77
- Joined: Wed Jan 18, 2017 4:39 pm
Re: Nozzle thermistor failed
Can you or anyone tell me where and how I need to install it? Thanks
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: Nozzle thermistor failed
This link is for building the big HE280, but the Eris hotend is very similar. https://seemecnc.dozuki.com/Guide/HE280+Assembly/45
Step 26 is the start of the thermistor installation.
Step 26 is the start of the thermistor installation.
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2