HE 280 acceleromteter failed?

Discussions related to the Rostock MAX v2
Post Reply
User avatar
dgriff
Printmaster!
Posts: 55
Joined: Sat Mar 01, 2014 2:19 am
Location: Vancouver, Canada

HE 280 acceleromteter failed?

Post by dgriff »

Wondering if my accelerometer might've got zapped with a static discharge and cooked (unfortunately our house gets quite dry in the winter and static is a major issue). Suddenly getting errors in the console:

09:35:34.323 : iis2dh accelerometer initializing...
09:35:34.340 : accelerometer i2c recv failed.

And if I try a calibration, it smacks the extruder into the build glass reasonably hard (gouged a chip out in one corner, fortunately could rotate the glass out of the way).

Any options to diagnose, or just need to replace? Did try re-seating the cable and no-dice. Guess I could just re-order the board and try swapping it (and some new glass too).
geneb
ULTIMATE 3D JEDI
Posts: 5227
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: HE 280 acceleromteter failed?

Post by geneb »

You might want to ping [email protected] and see what they have to suggest. It's been too long since I've worked with an HE280 to much help, sorry!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Rostock MAX v2”