FSR upgrade of an old max2

Discussions related to the Rostock MAX v2
Post Reply
benjaminhill
Prints-a-lot
Posts: 27
Joined: Thu Jun 30, 2016 9:19 pm

FSR upgrade of an old max2

Post by benjaminhill »

I've got a RostockMax v2 with an all metal hotend, and got a deal on a dusty FSR kit.

I don't have a duet board.

Is this a (how shall I say) "sane" thing to try? Am I gonna mess up a working rostock Max and regret trying this? Anyone gone through a similar upgrade?
geneb
ULTIMATE 3D JEDI
Posts: 5209
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: FSR upgrade of an old max2

Post by geneb »

You'll need a Duet if you want to use the FSRs. If they don't work, you can use a Duet Smart Effector (if you don't want to replace your hot end) or an SE300 hot end assembly (if you do). The SE300 and Duet Smart Effector use the same technique for detecting the nozzle touching the bed.

A Duet makes for an absolutely amazing upgrade.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Rostock MAX v2”