RADIAL FAN HOUSING TO FIT TRICKLASER & MAX 2

Post your prints with the GCode used to help other users achieve a similar result, or get help.
Post Reply
User avatar
draw-tech
Printmaster!
Posts: 44
Joined: Fri Apr 10, 2015 5:23 pm
Location: Brooksville FL

RADIAL FAN HOUSING TO FIT TRICKLASER & MAX 2

Post by draw-tech »

Hi all

Here is a file to fit the Tricklaser to the radial housing for the Rostock Max 2

I have added some material around the fan port, this can be removed after printing. Print with support setting on the fan port.

Draw-Tech
Attachments
Snapshot 1 (6-7-2015 11-12 AM).jpg
Snapshot 1 (6-7-2015 11-12 AM).jpg (8.73 KiB) Viewed 3243 times
I printed the fan Radial Housing2.pdf
(197.88 KiB) Downloaded 230 times
DSCN1193.JPG
Fan_Housing_TrickLight_9_.025.stl
(2.42 MiB) Downloaded 210 times
Post Reply

Return to “GCode & Test Prints”