RADIAL FAN HOUSING TO FIT TRICKLASER & MAX 2
Posted: Sat Jun 06, 2015 3:30 pm
Hi all
Here is a file to fit the Tricklaser to the radial housing for the Rostock Max 2
I have added some material around the fan port, this can be removed after printing. Print with support setting on the fan port.
Draw-Tech
Here is a file to fit the Tricklaser to the radial housing for the Rostock Max 2
I have added some material around the fan port, this can be removed after printing. Print with support setting on the fan port.
Draw-Tech