Page 1 of 1
My OPTIMUS-4G 3D Delta Printer
Posted: Mon Mar 02, 2015 10:59 am
by Khalid Khattak
Here is pictures of my new Optimus-4G 3D printer...
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 10:42 am
by Eaglezsoar
Looks good as a first printer. The lack of a heated bed limits you to PLA but I am sure that you knew that.
Good build!
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 10:48 am
by Nylocke
Missing heated bed? Am I missing something or is that not an Onyx?
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 11:07 am
by Eaglezsoar
Nylocke wrote:Missing heated bed? Am I missing something or is that not an Onyx?
You are correct, I didn't look that closely, now that I do it certainly is an Onyx.
Thanks for correcting me and my apologies to Khalid Khattak.
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 11:26 am
by Nylocke
Those eyes of yours not what they used to be?
![Razz :P](./images/smilies/icon_razz.gif)
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 11:58 am
by Khalid Khattak
Thanks guys ...i never printed with PLA so heat bed is must for ABS.. here i am printing Heat Bed adjustable supports...
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 12:17 pm
by Khalid Khattak
and this is my second printer..all the green parts for this printer were printed on my first printer
![Wink ;)](./images/smilies/icon_e_wink.gif)
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 1:02 pm
by Eaglezsoar
Nylocke wrote:Those eyes of yours not what they used to be?
![Razz :P](./images/smilies/icon_razz.gif)
At 62 it is a lot more than just the eyes!
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Tue Mar 03, 2015 1:03 pm
by Eaglezsoar
Khalid Khattak wrote:and this is my second printer..all the green parts for this printer were printed on my first printer
![Wink ;)](./images/smilies/icon_e_wink.gif)
Excellent design work!
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Fri Mar 06, 2015 9:04 pm
by 626Pilot
That's cool. After two kits from different vendors, I need to build my own printer someday.
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Fri Mar 06, 2015 9:10 pm
by AndyB
I've been watching your build comments for a few months now. You are impressive, and so is your printer. Looking forward to seeing your creation when it starts printing.
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Sat Mar 07, 2015 10:20 am
by Khalid Khattak
626Pilot.. I never purchased a Kit... My first 3D printer was named as DELTA-1 ( You can see the making thread in SeeMeCNC forum)..That printer was made using my homemade CNC machine.. Now making this second one Optimus-4G is made with the help of CNC machine and Delta-1....
Delta-1 never failed... It gave me excellent results i always use ABS and so far its printing excellent... Optimus 4G will be much better in precision in speed. I will suggest you to shift toward Magnetic joints (arms+effector)...what an ease to work with...
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Sat Mar 07, 2015 10:28 am
by Khalid Khattak
Thanks AndyB and Eaglezsoar ...
I hate when it take time to complete
![Wink ;)](./images/smilies/icon_e_wink.gif)
...
Re: My OPTIMUS-4G 3D Delta Printer
Posted: Thu Mar 19, 2015 5:01 am
by Khalid Khattak
My direct drive extruder variant ready to be 3D printed...