For the printer settings tab on a Delta Orion, what should my setting be for
Bed Size X - Y-
Print Center X- Y-
I can;t find anyway to change it to a 75mm radius.
Printer settings for Slic3r 1.1.7
-
- Printmaster!
- Posts: 171
- Joined: Tue Apr 22, 2014 10:00 pm
-
- Printmaster!
- Posts: 171
- Joined: Tue Apr 22, 2014 10:00 pm
Re: Printer settings for Slic3r 1.1.7
Anyone know?
Re: Printer settings for Slic3r 1.1.7
the bed size is for visualization so its not needed to be exact, I have mine at 150x150... but as far as print center, it should always be at 0,0 so that objects are always in the center of the bed...
Guanu
Guanu
-
- Printmaster!
- Posts: 171
- Joined: Tue Apr 22, 2014 10:00 pm
Re: Printer settings for Slic3r 1.1.7
OK, I will give that a try. I am trying to print a phone case and its telling me its too big.
-
- Printmaster!
- Posts: 171
- Joined: Tue Apr 22, 2014 10:00 pm
Re: Printer settings for Slic3r 1.1.7
I changed the Radius to 82 and it gave me just enough to print a phone case.