MRRF 2016 is HERE! - March 18-20 - Be there or be Cartesian!
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
I take it the rocket turned out ok?
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
https://www.facebook.com/cfairres/video ... 443212841/" onclick="window.open(this.href);return false;geneb wrote:I take it the rocket turned out ok?
[youtube]http://www.youtube.com/watch?v=Bs5JlUxnqzU[/youtube]
Last edited by Jimustanguitar on Mon Mar 21, 2016 3:39 pm, edited 1 time in total.
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
And if you didn't see Hackaday's panorama... It's awesome!
https://hackadaycom.files.wordpress.com ... norama.jpg" onclick="window.open(this.href);return false;
[img]https://hackadaycom.files.wordpress.com ... norama.jpg[/img]
https://hackadaycom.files.wordpress.com ... norama.jpg" onclick="window.open(this.href);return false;
[img]https://hackadaycom.files.wordpress.com ... norama.jpg[/img]
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Turned out fine Gene. Thanks for being there!geneb wrote:I take it the rocket turned out ok?
g.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Anybody have a web site or an email contact for the kitten printer folks? My wife was enamored with it and I only saw it briefly before I left, I had assumed I could google them but my google foo apparently isn't strong today (I only found real kittens).
PTMNBN="Printer that must not be named" - a heavily upgraded Replicator 2
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
I heard about it, too. Didn't get away from my own table enough to scope it out though.jmpreuss wrote:Anybody have a web site or an email contact for the kitten printer folks? My wife was enamored with it and I only saw it briefly before I left, I had assumed I could google them but my google foo apparently isn't strong today (I only found real kittens).
I'm uploading photo albums today. If you've got any pictures from MRRF to share, please share the link!
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
I'm bummed that I somehow missed a printer that printed kittens.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
geneb wrote:I'm bummed that I somehow missed a printer that printed kittens.
g.
I missed it also, if anyone has any pictures of it I would appreciate a posting of the picture.
In the mean time I will go to the pet store and see if I can find a kitten that could print printers.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Maybe they will visit next year's MRRFgeneb wrote:I'm bummed that I somehow missed a printer that printed kittens.
g.
http://1000words.kodak.com/2012/04/01/i ... liveprint/" onclick="window.open(this.href);return false;
As for pictures to share I only took a couple, here is the one of my spread. A close up of my 3D printed photo
PTMNBN="Printer that must not be named" - a heavily upgraded Replicator 2
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Finally found the answerjmpreuss wrote:Anybody have a web site or an email contact for the kitten printer folks? My wife was enamored with it and I only saw it briefly before I left, I had assumed I could google them but my google foo apparently isn't strong today (I only found real kittens).
Github (yes it's opensource): https://github.com/woolfepr/Printer-Kitten" onclick="window.open(this.href);return false;
Website: http://printerkitten.com/" onclick="window.open(this.href);return false;
PTMNBN="Printer that must not be named" - a heavily upgraded Replicator 2
- Windshadow
- Printmaster!
- Posts: 526
- Joined: Mon Nov 30, 2015 6:35 pm
- Location: Mid Coast Maine
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
That Kitten looks like a nice clean design for a small printer but the use of wire to bundle the heater leads i don't like even if it is over the double insulation part of the can heater leads.
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
I designed a similar counterweight system. Mine isn't quite as muscularJimustanguitar wrote:https://www.facebook.com/cfairres/video ... 443212841/" onclick="window.open(this.href);return false;geneb wrote:I take it the rocket turned out ok?
[youtube]http://www.youtube.com/watch?v=Bs5JlUxnqzU[/youtube]
Questions? Ask in a thread - PMs are off.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
AI Calibration | Dimensional Accuracy Calibration | Hand-Tune your PID | OctoPi + Touchscreen setup | My E3D hot end mount, Z probe, fan ducts, LED ring mount, filament spool holder, etc.
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Have the links to the sessions been posted anywhere?
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
JMPREUSS, thank you for finding the correct answer. More than a few were looking for that one but you delivered!jmpreuss wrote:Finally found the answerjmpreuss wrote:Anybody have a web site or an email contact for the kitten printer folks? My wife was enamored with it and I only saw it briefly before I left, I had assumed I could google them but my google foo apparently isn't strong today (I only found real kittens).
Github (yes it's opensource): https://github.com/woolfepr/Printer-Kitten" onclick="window.open(this.href);return false;
Website: http://printerkitten.com/" onclick="window.open(this.href);return false;
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
John Oly is doing some post production on them at the moment. I'll say something when they're posted on Youtube.jlmccuan wrote:Have the links to the sessions been posted anywhere?
Thanks for finding the Kitten!
- barry99705
- Printmaster!
- Posts: 707
- Joined: Sun Aug 11, 2013 6:10 pm
- Location: west ohio
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Sweet! That's what printer you guys are talking about. I was talking to Gene and notice they had one of them stacked on top of the other two, and it was printing upside down! Guess that's one way to deal with nozzle drool!
Never do anything you don't want to have to explain to the paramedics.
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
I have a sneaking suspicion that nozzle accumulation would be a much worse issue like that, and I would hate to deal with a print detaching while I was doing that.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Re: MRRF 2016 is HERE! - March 18-20 - Be there or be Cartes
Just wondering how the post production of the Saturday sessions was coming along.