Increasing Max Temperature.

Talk about the Repetier Host software here (http://repetier.com)
Post Reply
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1409
Joined: Sun May 11, 2014 6:18 pm

Increasing Max Temperature.

Post by Mac The Knife »

Is the extruder temperature limited by Repetier? or is it limited in the firmware? And how do I change it?
R-Max V2
Eris
Folger Tech FT-5 R2
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Increasing Max Temperature.

Post by Eaglezsoar »

Mac The Knife wrote:Is the extruder temperature limited by Repetier? or is it limited in the firmware? And how do I change it?
It is limited in firmware.
You need to edit your configuration.h looking for max_temp for the extruder (hotend)
See this link: http://forum.seemecnc.com/viewtopic.php?f=60&t=5343" onclick="window.open(this.href);return false;
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1409
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Post by Mac The Knife »

Now I see it. I had assumed it would be with the extruder settings, not below the bed settings. Line 575

Thanks.
R-Max V2
Eris
Folger Tech FT-5 R2
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Increasing Max Temperature.

Post by Eaglezsoar »

Mac The Knife wrote:Now I see it. I had assumed it would be with the extruder settings, not below the bed settings. Line 575

Thanks.
I am just glad that you found it. Navigating those config files can be a bear, nothing is where you expect it to be.
Happy Printing!
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1409
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Post by Mac The Knife »

Here's the next problem,,,,,, If I try to adjust the temperature while the printer is running, It drops to 240, and will not go back up. Is that also in the config h file?
R-Max V2
Eris
Folger Tech FT-5 R2
User avatar
Mike B
Printmaster!
Posts: 44
Joined: Wed May 21, 2014 1:10 pm
Location: West Lafayette, IN

Re: Increasing Max Temperature.

Post by Mike B »

Knife,

Did you ever figure out a way around not being able to adjust the temp from the LCD? I am having the same issue. I can hit 275 through Repetier Host, but trying to adjust with LCD max is still 240.

Thanks!

Mike
User avatar
Mike B
Printmaster!
Posts: 44
Joined: Wed May 21, 2014 1:10 pm
Location: West Lafayette, IN

Re: Increasing Max Temperature.

Post by Mike B »

Disregard! I found it in configuration.h under #define UI_SET_MAX_EXTRUDER_TEMP
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1409
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Post by Mac The Knife »

Sorry about that,, Yeah, that setting is down around line 900. They really make you hunt around for the settings.
R-Max V2
Eris
Folger Tech FT-5 R2
User avatar
dmo
Printmaster!
Posts: 56
Joined: Mon Nov 02, 2015 3:18 pm
Location: Washington, DC
Contact:

Re: Increasing Max Temperature.

Post by dmo »

On mine it's line 1240, took a while to dig down there.
Post Reply

Return to “Repetier Host”