Hello everyone!
This is my first post and my first printer, so excuse my lack of knowledge. The reason I'm here is because I cannot seem to find what exactly I connect the heat bed to on my new V3? I have read the manual, but it seems VERY vague to me. I have the two white wires fed up through one of the towers already, i just dont know where to go from there. Besides that, everything else is assembled. Can someone please help me?
Brandon
Traverse City, MI
Help connecting heat bed to rambo
Re: Help connecting heat bed to rambo
What step in the Final Assembly doc are you getting hung up on? It's pretty clear what goes where.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: Help connecting heat bed to rambo
You'll want to connect them to one of the thermistor sockets. And from what I see, unfortunately, the manual isn't entirely clear (Geneb, is the correct socket noted somewhere and just not loading, or did that get overlooked/edited out accidentally?). However, I'm pretty sure you want to attach it to the T2 socket, as with a V2.
Let us know if you have any other problems, or projects. We enjoy helping with and seeing both.
Let us know if you have any other problems, or projects. We enjoy helping with and seeing both.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Re: Help connecting heat bed to rambo
I can only assume that people are not watching the videos.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- DeltaCon
- Printmaster!
- Posts: 616
- Joined: Sat Nov 14, 2015 5:01 am
- Location: Wessem, The Netherlands
- Contact:
Re: Help connecting heat bed to rambo
Not to criticize your efforts Gene, but working with video is terrible. It is nice to have exampled things in video BEFORE you start building, but as a reference WHILE building it is just a lot more work than patient paper on your desk. Video needs to be paused, rewinded and started over too much. Well for me in particular, because I cannot keep up to someone else his pace...geneb wrote:I can only assume that people are not watching the videos.g.
I am DeltaCon, I have a delta, my name is Con, I am definitely PRO delta!
Rostock V2 / E3D Volcano / FSR kit / Duet 0.6
PS.: Sorry for the avatar, that's my other hobby!
Rostock V2 / E3D Volcano / FSR kit / Duet 0.6
PS.: Sorry for the avatar, that's my other hobby!
Re: Help connecting heat bed to rambo
DeltaCon wrote:Not to criticize your efforts Gene, but working with video is terrible. It is nice to have exampled things in video BEFORE you start building, but as a reference WHILE building it is just a lot more work than patient paper on your desk. Video needs to be paused, rewinded and started over too much. Well for me in particular, because I cannot keep up to someone else his pace...geneb wrote:I can only assume that people are not watching the videos.g.
I'd have to agree based on building our V2, I would have hated video instructions. The checkpoint videos were a nice touch, but having paper in front of you when building something like this much better to me.
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: Help connecting heat bed to rambo
I looked for a video on that step, as well as one for a step that included connecting things to the Rambo. I found different videos and pictures loaded when I tried refreshing it, but never got a video or picture that made sense of that.geneb wrote:I can only assume that people are not watching the videos.
g.
I'm also with Twotone and Deltacon on the paper instructions version. I would offer to transcribe video and pull pictures out to make a written version, if life weren't rather hectic right now.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001