Forum Maintenance 12/23/2018

General info from SeeMeCNC HQ
Post Reply
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Forum Maintenance 12/23/2018

Post by PartDaddy »

:!: Our forum will be shut down additional maintenance December 26th, 2018, during the evening. Thank you!!

:ugeek:
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
User avatar
lightninjay
Printmaster!
Posts: 289
Joined: Sun Jul 13, 2014 12:49 am
Location: Tampa, Florida

Re: Forum Maintenance 12/23/2018

Post by lightninjay »

Not to be "that guy", but the dark forum theme has been lost during this maintenance. Understood that it is ongoing, as this is the holiday season, just wanted to report it before somebody else, potentially more hostile than myself, goes off about it. :lol:
If at first you don't succeed, you're doing something wrong. Try again, and if it fails again, try once more. Through trial and error, one can be the first to accomplish something great.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Forum Maintenance 12/23/2018

Post by geneb »

Part of the upgrade is disabling all the non-stock forum styles. The dark theme will be re-enabled once the upgrade is done. ;)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
User avatar
Outsider
Printmaster!
Posts: 75
Joined: Wed Nov 11, 2015 6:09 pm

Re: Forum Maintenance 12/23/2018

Post by Outsider »

perfect :D
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Re: Forum Maintenance 12/23/2018

Post by PartDaddy »

Yes. Once we complete the update, we will enable the dark theme.

Thank you!
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
User avatar
kfonda
Plasticator
Posts: 10
Joined: Fri Apr 21, 2017 11:52 pm
Location: Manasquan, NJ USA
Contact:

Re: Forum Maintenance 12/23/2018

Post by kfonda »

I can't get search to work in the forums since the upgrade. I'm not sure if it's me or the site.
User avatar
Outsider
Printmaster!
Posts: 75
Joined: Wed Nov 11, 2015 6:09 pm

Re: Forum Maintenance 12/23/2018

Post by Outsider »

I also tried the "search" function this afternoon. I have an RMax-v.2 and looked for info on the HE280 as an upgrade. I also could not get it to work.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Forum Maintenance 12/23/2018

Post by geneb »

I'll look into it. There were some database issues during the upgrade. :(

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “General Announcments”