3D Printer World Expo in Burbank, CA 1/31-2/1 2014
3D Printer World Expo in Burbank, CA 1/31-2/1 2014
We'll be visiting, but no booth. I hear John Stack form the forum here will be meeting us there, if anyone else is near, stop on by the show! Steve and I will be there Thursday afternoon thru Sunday morning
Here's a link to the event
http://www.3dprinterworldexpo.com/" onclick="window.open(this.href);return false;
Here's a link to the event
http://www.3dprinterworldexpo.com/" onclick="window.open(this.href);return false;
-
- Printmaster!
- Posts: 446
- Joined: Sun Jun 30, 2013 5:52 pm
- Location: Orange County, CA
- Contact:
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
I will be there as well. I'm speaking at 2 seminars on Saturday.
I'll be on the lookout for you guys.
I'll be on the lookout for you guys.
Fellow Philosophy majors unite!
"The proverbial achilles heel of property monistic epiphenomenalism is the apparent impossibility of ex-nihilo materialization of non-structural and qualitatively new causal powers."
"The proverbial achilles heel of property monistic epiphenomenalism is the apparent impossibility of ex-nihilo materialization of non-structural and qualitatively new causal powers."
-
- Printmaster!
- Posts: 58
- Joined: Mon Sep 23, 2013 11:18 pm
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
I'll be there as well! Cope, what seminars are you speaking at? John, we should grab a drink one night while you're out there. I'll get in late on Thursday.
-
- Printmaster!
- Posts: 446
- Joined: Sun Jun 30, 2013 5:52 pm
- Location: Orange County, CA
- Contact:
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Materials - Common and Exotic
Post-Processing Tips and Tricks
both on Saturday.
http://www.3dprinterworldexpo.com/page. ... h=46971_98
Post-Processing Tips and Tricks
both on Saturday.
http://www.3dprinterworldexpo.com/page. ... h=46971_98
Fellow Philosophy majors unite!
"The proverbial achilles heel of property monistic epiphenomenalism is the apparent impossibility of ex-nihilo materialization of non-structural and qualitatively new causal powers."
"The proverbial achilles heel of property monistic epiphenomenalism is the apparent impossibility of ex-nihilo materialization of non-structural and qualitatively new causal powers."
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Awesome! Will keep an eye out. And Graham, really? All the way from the fort?
-
- Printmaster!
- Posts: 58
- Joined: Mon Sep 23, 2013 11:18 pm
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Yep, all the way from the Fort! I'll be there on behalf of this: http://www.thegigcity.com/startup-tracks/3d-printing/" onclick="window.open(this.href);return false; scouting talented companies that are a good fit for the accelerator, etc. I'm a specialist with them at this point.
- MikeTitsch
- Noob
- Posts: 1
- Joined: Tue Jan 28, 2014 1:25 am
- Location: Phoenix, AZ
- Contact:
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
It'll be good to see you again, Cope. I speak in one of the sessions and introduce others on Saturday, but Friday I'll probably be on the floor with one of the video crews.
I also look forward to meeting you, John. Lee Goldberg, the writer who did the feature on you guys last year will be there as well (all our writers will be there).
FYI, we expect a relatively busy show floor, particularly on Saturday. Fun names on some of the badges like Sony Entertainment, DreamWorks, Disney, Blizzard, various FX companies. I don't think there has been another 3D printing show like it. A lot of personal printers and pricey pro stuff on the same floor, with makers, engineers, educators, artists and Hollywood-types packing the place.
We're excited, but I may need CPR by Sunday.
I also look forward to meeting you, John. Lee Goldberg, the writer who did the feature on you guys last year will be there as well (all our writers will be there).
FYI, we expect a relatively busy show floor, particularly on Saturday. Fun names on some of the badges like Sony Entertainment, DreamWorks, Disney, Blizzard, various FX companies. I don't think there has been another 3D printing show like it. A lot of personal printers and pricey pro stuff on the same floor, with makers, engineers, educators, artists and Hollywood-types packing the place.
We're excited, but I may need CPR by Sunday.
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Excellent! Can't wait to meet you all again, and for the first time if we havn't yet.
FYI, Thursday night we are having a 'Delta Dinner' with some of the other big names in Delta 3D Printers. Anyone's welcome to join up, post up here if you'd like to meet up Thursday night!
FYI, Thursday night we are having a 'Delta Dinner' with some of the other big names in Delta 3D Printers. Anyone's welcome to join up, post up here if you'd like to meet up Thursday night!
-
- Printmaster!
- Posts: 58
- Joined: Mon Sep 23, 2013 11:18 pm
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
What time on Thursday night will this be? Cal time please.
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
WE're here!
You got my cell number still graham?
You got my cell number still graham?
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
See you all there!
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Not the SeeMeCNC crew in the wild but thought this note I sent to John might be of interest...
We just returned from the Sun N Fun airshow in Lakeland Florida.
We took along the printer to demonstrate in the Engines Workshop which we co-chair.
Gene had sent us a few parts he had made for the spitfire guys in Australia and we had several of our own parts that we use for avionics we make.
I was not expecting the level of interest we received. I would start at 9AM and talk non-stop until we shut down for the Thunderbirds at 2:30 due to noise. I had downloaded a small jet from thingverse to print, takes about 45 min per, used Blue Angels blue ABS. Had to give away a lot of them "for the grandkids" of course.
Sun N Fun has sponsored and built an approved aviation high school on the grounds and students study engineering, airframe and powerplants and other aviation career paths. The directors of the school were very with the presentation and brought down teachers and students to see the printer and hear some of the presentation. I also told them about your new student version of the printer. They seemed excited and the lights went on as ideas formed.
There were also a lot of people writing down the company name and URL so I hope it manifests some business for you.
We pointed out the lost PLA investment path to metal parts and sand casting techniques, our direct to product prints and a theoretical process of building a throttle quadrant needing nylon bushings, nylon friction pads with end stops and printing the throttle, mixture, and propeller pitch lever knobs in the correct iconic shapes as well as universal color. Lots of recognition that this has real world applications in experimental aviation.
We just returned from the Sun N Fun airshow in Lakeland Florida.
We took along the printer to demonstrate in the Engines Workshop which we co-chair.
Gene had sent us a few parts he had made for the spitfire guys in Australia and we had several of our own parts that we use for avionics we make.
I was not expecting the level of interest we received. I would start at 9AM and talk non-stop until we shut down for the Thunderbirds at 2:30 due to noise. I had downloaded a small jet from thingverse to print, takes about 45 min per, used Blue Angels blue ABS. Had to give away a lot of them "for the grandkids" of course.
Sun N Fun has sponsored and built an approved aviation high school on the grounds and students study engineering, airframe and powerplants and other aviation career paths. The directors of the school were very with the presentation and brought down teachers and students to see the printer and hear some of the presentation. I also told them about your new student version of the printer. They seemed excited and the lights went on as ideas formed.
There were also a lot of people writing down the company name and URL so I hope it manifests some business for you.
We pointed out the lost PLA investment path to metal parts and sand casting techniques, our direct to product prints and a theoretical process of building a throttle quadrant needing nylon bushings, nylon friction pads with end stops and printing the throttle, mixture, and propeller pitch lever knobs in the correct iconic shapes as well as universal color. Lots of recognition that this has real world applications in experimental aviation.
-
- ULTIMATE 3D JEDI
- Posts: 1409
- Joined: Sun May 11, 2014 6:18 pm
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Where the hell is the "Like" button?
R-Max V2
Eris
Folger Tech FT-5 R2
Eris
Folger Tech FT-5 R2
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
\o/
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
We'd also like to thank Gene for the parts he generously loaned us to show at the airshow, they made a difference when instead of Yodas or call boxes I could hold up a part and call it a prototype to verify form/fit/function or pattern for casting they'd get excited.
Thank you Gene!
Thank you Gene!
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
Oh and one other word...
Every time some guy came in and said he had a Makerbot in his office I'd reach out, gently place my hand upon his and with greatest sincerity say "You have my condolences" ...it only seemed appropriate![Laughing :lol:](./images/smilies/icon_lol.gif)
Every time some guy came in and said he had a Makerbot in his office I'd reach out, gently place my hand upon his and with greatest sincerity say "You have my condolences" ...it only seemed appropriate
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: 3D Printer World Expo in Burbank, CA 1/31-2/1 2014
You're quite welcome! I'm glad folks liked the goodies. ![Smile :)](./images/smilies/icon_e_smile.gif)
g.
![Smile :)](./images/smilies/icon_e_smile.gif)
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects